Nom : | Payne 13 SEER PH13NA |
Marque : | Payne |
Modèle : | PH13NA018000 PH13NA024000 PH13NA030000 PH13NA036000 PH13NA042000 PH13NA048000 PH13NA060000 |
|
The PH13NA unit delivers comfort with 13 SEER (Seasonal Energy Efficiency Ratio) cooling and 7.7 HSPF (Heating Seasonal Performance Factor) heating efficiency. It's equipped with our standard grille for attractive, durable coil protection. If your concern over environmental issues is on equal footing with your desire to be comfortable at home, the PH13NA heat pump is offered with chlorine-free, R-410A refrigerant. Attractive, designed for minimal effect on the Earth's ozone layer and built to last, this is a smooth-running, energy-saving heating and cooling machine. This model incorporates the EPA-approved and industry accepted R-410A refrigerant, the environmentally sound alternative to R-22. |
|
AVAILABLE SIZES:
Nominal sizes are available from 018 through 060 to meet the needs of residential and light commercial applications.
PERFORMANCE:
All models are verified for efficiency and capacity by ARI.
ELECTRICAL RANGE:
All units are offered in 208/230--1, single phase, with 208/230--3 three phase offered in models 048 -- 060.
FAN MOTOR:
The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years. The permanent split capacitor type motor was designed for optimum efficiency. The motor was then qualified under extreme conditions to help ensure a long, reliable life.
CABINET:
A weather protective cabinet of prepainted steel is protected underneath by a galvanized coating and treated with a layer of zinc phosphate for a finish that will last for many years. All screws on cabinet exterior are coated for a long--lasting, rust--resistant, quality appearance.
UNIT DESIGN:
The copper tube, enhanced sine wave, aluminum fin coil is designed for optimum heat transfer. Vertical air discharge carries sound and condenser air up and away from adjacent patio areas and foliage. The base pan is designed for easy removal of water, dirt, and leaves.
DEFROST CONTROL BOARD:
Incorporates defrost relay, defrost timer, and low voltage terminations. The defrost control is a time/temperature initiation/termination control which includes three field--selectable time periods of 30, 60 and 90 minutes.
COMPRESSOR:
Each compressor is protected with internal temperature-- and current--sensitive overloads. An internal pressure relief valve provides high pressure protection to the refrigerant system. For improved serviceability, all models are equipped with a compressor terminal plug.
SERVICE VALVES:
Both service valves are brass, front seating type with sweat connections. Valves are externally located so refrigerant tube connections can be made quickly and easily. Each valve has a service port for ease of checking operating refrigerant pressures.
SERVICEABILITY:
One access panel provides access to electrical controls. Removal of top gives access to fan motor, compressor, and condenser coil.